UART Module for ECC
Interchangeable interfaces using the Embedded Communications Connector
Gerber file
CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor GREEN and GOLD members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.
Elektor recommends the Elektor PCB Service service from its business partner Eurocircuits or AISLER as the best services for its own prototypes and volume production.
TIP: your first PCB at AISLER is free up to €30 with using the coupon code ELCCBB at checkout.
The use of our Gerber files is provided under a modified Creative Commons license. Creative Commons offers authors, scientists, educators and other creatives the freedom to handle their copyright in a more free way without losing their ownership.
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Resistors (SMD 0805, .125W)
R1,R2 = 10kOhm 5%
R3 = 120Ohm 5%
R4 = 1.5kOhm 5 %
Capacitors (SMD 0805)
C1 = 1µF 10V 10%, X7R
Semiconductors
D1 = LED, green, 3mm, low current, through hole
IC1 = LT1785CS8#PBF (SO-8)
Miscellaneous
K1 = 10-pin (2x5) pinheader, 0.1’’ pitch
K2 = 3-way PCB mount screw terminal block, 0.2’’ pitch
JP1 = 2-pin pinheader with jumper, 0.1’’ pitch
PCB # 130155-1 v1.2
or
PCB, ready assembled and tested, Elektor Store # 130155-91
We buy at:
Discussion (0 comments)