Elektor ‘Digisplay’ (1976-77)
Published in issue 2/2009 on page 77
While cleaning out the instrument cabinet in our company shop, I came across a Digisplay unit that I built and used many years ago with considerable pleasure. At that time, I regularly put together circuits with gates, timers, counters and readouts, and it was a godsend to be able to tap 14 to 16 signals at once with an IC test clip and see the states of all these signals at the same time on a screen. In May 1976 Elektor published a circuit for connection to an oscilloscope that allowed the values of 16 signals to be read on the screen in the form of 1’s and 0’s.
Downloading of this magazine article is reserved to Elektor Members only. To become a Member, go to www.elektor.com/subs.