AVR-Max Chess Computer

A minimalist homebrew chess computer

Published in issue 11/2009 on page 64

For just a few pounds you can take a microcontroller, add a few pushbuttons and some 7-segment displays to build a chess computer reminiscent of the legendary Mephisto I. The low component count (and no SMDs!) allows the entire machine to be shrunk onto a neat pocket-sized PCB. Despite LED displays it draws just 20 mA and will run until the battery supply falls below 1.9 V.

Downloading of this magazine article is reserved to Elektor Members only. To become a Member, go to www.elektor.com/subs.



R1–R8 = 470Ohm
R9–R13 = 10kOhm
C1,C2 = 100nF (lead pitch 0.1” / 2.54mm)
L1 = 10µH (fixed inductor)
LD1–LD4 = SA52-11 (Kingbright), 7-segment LED display, red, common anode, 13.2mm height
T1–T4 = BC559C (or -B)
IC1 = ATmega88P-20PU (Atmel), programmed, Elektor Shop # 081101-41
S1–S11 = push button, 1 make contact, PCB mount, e.g. Multicomp MCDTS6-5N
K1 = 2-way pinheader or 2 solder pins
K2 = 6-way DIL pinheader
K3 = 6-way SIL pinheader, right angled (optional)
Battery holder for 2 AA or 2 AAA batteries
Kit of parts # 081101-71 (see Elektor-Shop, www.elektor.com)
PCB # 081101-1
Project software, free download # 081101-11.zip from www.elektor.com/081101